Instrument Choice

Product Code: C392-IC

The CENTER 392 fully complies with IEC61672-1 Class 2. It measures Leq, MaxL, MinL, and SPL. This meter has only one measuring range and it is extending from 30db to 130db that is full 100db. This unit is also a data logger and it is equipped with manual storing capability which can store 99 sets of data and can be readout from unit or through PC.

Product Code: IC-UT305R

The UNI-T Non-Contact Digital Infrared Thermometer UT305R with Tripod Mounting Hold will sound an alarm for the upper and lower temperature limit to help identify fevers.

Product Code: IC-ST10

Small, economical pen meter: simple, fast, straightforward, no-frills operation.

- Range: 0.0-14.0
- Accuracy: 0.1pH
- Automatic battery saving shut down

Product Code: IC-8380

The TSI 8380 AccuBalance Air Capture Hood is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings at diffusers and grilles. It features a detachable micromanometer which can be used with optional probes for increased flexibility in multiple measurement applications.

Product Code: IC-Deionized-Water

Five Litre (5L) Deionized-Water

Product Code: IC-SPH006D

The Pooltest 6 is a dual light source, waterproof, LCD chlorine meter that can measure chlorine (up to 5 ppm Chl), pH, Cyanuric acid, Calcium hardness, Total Alkalinity and Bromine.

Product Code: IC-PM

The IC-PM is Aeroqual's portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual's Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.

Product Code: IC-30400164

OHAUS Block Heater accessories include modular blocks to accommodate almost any sample. Modular blocks feature close contact of tubes-to-walls allowing for maximum heat retention.

Product Code: IC-MR176

The FLIR MR176 Imaging Moisture Meter Plus with IGM technology is an all-in-one tool equipped with a built-in thermal camera that can show you exactly where to measure moisture.

Product Code: FLUKE-376

Fluke 376 True-rms AC/DC Clamp Meter with iFlex

Product Code: IC-MG3002

General purpose magnetic meter for industrial, mechanical, material, electrical, and laboratory field usage.

Product Code: IC-BZAC0010

Simple and reliable hour meter that separates summation of working time (use in the field) and travel time (travel to the field) possible by changing the position of the counter.

Product Code: IC-1010

The ethernet connection enables the standard Aquation Fluorescence Sensor to be connected to systems and terminals that communicates with the ethernet protocol

Product Code: IC-1006

The SDI-12 connection enables the standard Aquation Fluorescence Sensor to be connected to industrial or process systems such as greenhouses or phenotyping facilities, or any controller/datalogger system that communicates with the SDI-12 protocol

Product Code: IC-PR-50HO

The PR-50HO is suitable for measuring the concentration of a water solution of hydrogen peroxide used as a disinfecting solution for cartons for soft drinks and milk-based drinks. With temperature compensation.

Product Code: IC-PR-60PA

The PR-60PA is suitable for measuring the concentration of isopropyl alcohol for industrial applications that require small samples with a specific concentration. With temperature compensation

Product Code: IC-83032109

Ethernet kit of OHaus Navigator scale series.

Product Code: IC-CO220

Measures Carbon Dioxide (CO2), Air Temperature and Humidity with user adjustable visual and audible alarm plus calculates Dew Point and Wet Bulb

Product Code: IC-GA142

The SONIK-S helps you protect your workforce from over exposure to noise, and helps you ensure your company is complying with The Control of Noise at Work Regulations 2005.

Product Code: IC-HI36183

The HI36183 is a glass body, refillable, single junction ORP electrode with a built-in temperature sensor and a quick connect DIN connector. This type of connector is proprietary to specific meters such as the HI98190.

Product Code: IC-GT-2-006

The Globe Temperature Sensor, GT-1 is used with humidity and ambient air temperature sensors to calculate wet-bulb globe temperature (WBGT).This model comes with a 5 m cable and 10 kohm thermistor.

Product Code: IC-DT-107A-S12

Accurately measure rotational and surface speed, as well as length. Built-in selector switch permits the user to display readings in a wide variety of engineering units. LED model appropriate for poorly lit or dark environments. Includes 12" circumference measuring wheel.

Product Code: IC-MeteobridgePRO

Meteobridge PRO is the first Meteobridge product that consists of software and specially for the purpose designed hardware. It has a a power footprint of 1-2 Watts, internal data storage of 1GB,LAN and WiFi capabilities, a graphical OLED display, 2 external USB ports and integrated RF capability to receive data from Davis Instruments sensors directly.

Product Code: PE-12

Spare replacement probe - combined general purpose pH sensor for PH222

Product Code: IC-30424404

2nd RS232/RS485/USB Kit, TD52.

Product Code: IC-HI99181

The Hanna Instruments HI99181 is a durable, waterproof, and portable pH and temperature meter designed specifically for analysis of skin. Automatic calibration is performed at one or two points with two sets of buffers. All calibration and measurement readings are automatically compensated for temperature variations.

Product Code: IC-0560 4401

Precise, reliable measurement of all air velocity and IAQ parameters with just one measuring instrument: the multifunction measuring instrument features intuitive operation with clearly structured measurement menus.

Product Code: IC-0560 6450

The testo 645 humidity and temperature measuring instrument automatically indicates the measurement parameters of relative humidity, absolute humidity, dew point, degree of humidity, enthalpy, and temperature, at the touch of a button.

Product Code: IC-TSSP-1-001

The TSSP-1 is a stainless steel thermistor probe used to measure soil temperature, liquid temperature, or surface temperature. The sensing element is a swaged stainless steel shell.

Product Code: IC-TC117K

Thermocouple hand probe surface type k 3 ribbon tip 150 mm pvc grip with 2 mtr curly cord lead and mini plug maximum temperature 400 deg celsius.

Product Code: IC-TM-194

The Tenmars TM-194 Microwave Oven Leakage Detector is used to measure electromagnetic fields of 2.45GHz (microwave frequency). It has a measuring range from 50MHz to 3.5GHz.

Product Code: IC-9565-X-NB

Multi-function ventilation meter, no plug-in probes, no differential pressure sensor

Product Code: IC-AP500-PFFL

The AirPro Velocity Meter AP500 is a wireless Hotwire anemometer. This model includes a barometric pressure sensor for air density correction, integrated display, two buttons (power and save), professional software and license,and a rechargeable lithium-ion battery; which can be charged via USB. Compatible with other probes for additional measurements, each sold separately.

Product Code: IC-357 1000 001

The wind sensor 4-20mA output signals are linear for both wind speed and direction. Uses a sintered bronze bearing within its cup assembly. Each unit comes supplied with: wind sensor (anemometer), output control box, 2 x 25m of connecting cable, and finally a wind sensor alignment compass.

Product Code: IC-PS-306

Mount for IC-WL-11 and IC-WL11X/WSD

Product Code: IC-0430 0143

Connection cable - Connection cable, 1.5 meters long for testo 645 probes

Product Code: IC-SGD ADPT-420

This add-on module interfaces directly with compatible PanelPilot M series displays. It features two isolated input channels and takes its power directly from the SGD meter.

Product Code: IC-30097591

Discrete I/O Kit, 2-In/4-Out, R71 TD52 for OHaus Bench scales.

Product Code: IC-30429666

Ethernet kit for OHaus bench scales.

Product Code: IC-HI96701-11

The HI96701-11 Free Chlorine Cal Check standards provides a simple solution to calibrating and validating the compatible free chlorine portable photometers that have a 0.00 to 5.00 mg/L (ppm) range.

Product Code: IC-HI93701-03

The HI93701-03 are reagents for the colorimetric determination of free chlorine, for use with Hanna's line of compatible benchtop and portable meters.

Product Code: IC-30424022

In-Use-Cover, TD52P

Product Code: IC-LTV-R1

LTV-R1 LT View - Connected Rain Gauge for use with La Crosse V22-WRTH and 724-2310.

Product Code: IC-LTV-TH2

LTV-TH2 Thermo-Hygro Sensor for use with La Crosse V10-TH, V21-WTH, V22-WRTH and V40-PRO.

Product Code: IC-LTV-W1

LTV-W1 Wind Sensor for use with La Crosse V21-WTH and V22-WRTH.

Product Code: IC-30303533

Micro SD Card, 8G

Product Code: IC-pH60S-DE

Replacement probe for PH60S-Z Smart Spear Pocket pH Tester.

Product Code: IC-S-RGB-M002

This Rain Gauge Smart Sensor measures rainfall with intensity up to 12.7 cm per hour with a resolution of 20 mm, and 1% accuracy for rainfall rates up to 0.2 mm/hour. The tipping bucket mechanism is mounted on a stainless steel shaft with brass bearings. This model includes a 2m cable.

Product Code: IC-30268982

RS232 Interface for Scout Digital Scales

Product Code: IC-CABLE USB A-SIL5

Single in-line USB cable for SGD 21-B. Male USB A to Female 5 Way Crimp Connector, USB 2.0 Black 100mm.